Jump to content

Saturday 23rd November 2024 - kick-off 3pm

Scottish Premiership - St Mirren v Aberdeen

Recommended Posts

Posted

Ahhh, the orange orangeman. Unreal how critical he was of AFC on the radio the whole game on Saturday.

 

The educated would say that he was totally right with his criticism.

 

The wise recognised the mindset and the tone with which the criticism was delivered.

Posted

Chat today was a relief well would take 6 months to drill.

 

Said that on breakfast this morning too.  As ticket said, certainly will give them an excuse to drive up prices after recent criticism stating they were too high.

Posted

The platform is still flaring, how is that possible? 

 

Its not been put out.

 

I thought the shutdown systems shutdown everything!?

 

Its not good to just turn it off, you ideally have to turn it off gradually.

Posted

Its not been put out.

 

Its not good to just turn it off, you ideally have to turn it off gradually.

 

These platforms are full of automated shutdown systems that should have done the job.

Posted

The flare is an integral part of the platform's safety system. In an emergency it is used to safely evacuate all the gas from the platform. During the incident it performed this task perfectly, allowing everyone to evacuate safely.

 

When the emergency de-pressurisation is initiated, all hydrocarbons feeds are closed and valves are opened on installations vessels to de-pressurise gas to the flare. These valves remain open as they are designed to in such circumstances.

 

The flare is still lit because when the platform is shut down and de-pressurised in an emergency, it cannot be fully purged as done in a controlled shutdown. This is perfectly normal. Some liquids do remain in the system and these liquids are now evaporating. As these liquids evaporate the flow of hydrocarbons to the flare will exhaust itself and the flare should burn out.

 

At present the flare does not pose any immediate risk as the layout is designed to take into account the prevailing wind direction, ensuring that these winds are taking any gas from a potential leak in the wellhead area in the opposite direction to the flare. This is in fact exactly what is happening. The wind is forecast to remain in its current direction for the coming days. You can be assured that this is being reviewed on a constant basis and should this change any impact is being assessed. In parallel we are investigating solutions to extinguish the flare if it does not burn out by itself.

 

We will continue to make information available via the following:

 

www.twitter.com/TotalEPUK

www.totalepmediacentre.com/go?Elgin25mar2012

http://www.flickr.com/photos/totalepuk/

  • 1 month later...
Posted
The gas leak from the Elgin platform in the North Sea has been stopped, according to oil firm Total.

 

The company's platform was evacuated when the gas began leaking on Sunday 25 March.

 

An attempt to stop the leak by pumping heavy mud into the well got under way on Tuesday.

 

Total said the operation had stopped the well leak within 12 hours and described the development as a "major turning point".

 

Yves-Louis Darricarrère, Total's president of exploration and production, said: "Our absolute priority was to stop the gas leak safely and as quickly as possible.

 

"We shall now fully complete the ongoing task and take into account the lessons learnt from this incident."

Posted

Kill mud  will depend on a few things like the mud type i.e is its Oil based or waterbased mud. The annular pressure and equivalent circulation densitt must be lower than the casing pressure

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...